Well done plex, well done.
Oh hey, my win10 install is stuck in an endless loop of installs. Windows support has been unresponsive for 2 days. Seriously, I used to be surprised that MS lost their dominance from the 90’s, sure as fuck not surprised anymore.
They fucking OWN us, yet manage to secure zero fucking loyalty for their shit products.
Tracing route to ip-107-180-12-113.ip.secureserver.net [18.104.22.168]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms router.asus.com [192.168.1.1]
2 7 ms 7 ms 6 ms xx.xx.xx.xx
3 7 ms 7 ms 7 ms xx.xx.xx.xx
4 7 ms 8 ms 7 ms xx.xx.xx.xx
5 69 ms 67 ms 68 ms xx.xx.xx.xx
6 68 ms 67 ms 67 ms xx.xx.xx.xx
7 75 ms 75 ms 77 ms xx.xx.xx.xx
8 75 ms 74 ms 76 ms xx.xx.xx.xx
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 74 ms 75 ms 75 ms ip-107-180-12-113.ip.secureserver.net [22.214.171.124]
Everything after #5 are godaddy servers. But you know – gotta follow steps. So I call COX, who basically drop me into endless hold. Well first they told me they couldn’t help me with my router, and that anything that happens after my router connects is not their responsibility. OK whatever.
So lets give old GoDaddy a call again and see what happens this time. Sent them a traceroute. They said hops 9-12 give back a fake result due to their load balancing – that hop 5 is where the problems are starting, which is COX. So I’m too tired to call COX back – we will try it tomorrow.
Did some research, my ping times are fine – today I am back to nice and fast FTP to my host, even though the ping looks exactly the same. Can’t prove, but considering ONLY my godaddy FTP was slow as shit – that it was probably a GoDaddy issue.
Modern monitors have a much higher refresh rate than in the old days, by a factor of 10. What I needed was something that could handle 15hz ( or so – I didn’t know the exact refresh rate, since technical manuals are hard to find ). This is where I found a bunch of useful information from people who are into retrogames. If you are REALLY into old games like streetfighter for your NES you don’t roll with some shitty “modern” LCD/LED screen. You go oldschool CRT, where the scanlines are the luxurious background texture of your nostaglia fix.
edit: WTF happened to my re256 links! Maybe I deleted them all in a rage fit or something, but man. I’m really missing that folder right now
OK, so I basically need a 80s era monitor, or one of the specialized NEC Multisync monitors. ( cool, now I know why it said Multisync on the side of my monitors all those years ago ). I’m also competing with people who want to run their old AppleII and need a monitor. Some of those old CRTs are literally selling for $500+ on ebay.
Now, the time is ticking on my ability to return this thing… so I need to know if it even works beyond powering on. I hook up my oscilloscope hoping I can see something useful.
I don’t know why, but I was sort of hoping the CRT would just.. magically work and I’d see text. (It isn’t that easy… you can watch this video if interested in converting your oscope to a monitor..) Instead I get this. This is encouraging, since that looks like a waveform – though I have no idea wtf it means. However, the top looks like a TTL signal ( I think? )
Not sure what to make of it… but at least the RE256 is putting out something on the video channel.
Well – shopping / hunting for old computer shit is my idea of fun, so I’m going to put this on slow burn and wait for a monitor to show up.
HOW TO USE THE RE256
So I’ve realized at this point that using this block of metal is going to be a challenge. The more I know about it, the better I can fix it, and how fucked up is that I’m trying to fix a piece of gear that I know next to nothing about, so I can then maybe learn how to use it. Why not just dump it? I wish I knew, and I wish I had. But at this point I have a fantasy in my head of fixing this, and having this awesome distortion analyzer and I’m like already a “RADIOMETER ELECTRONICS” fanboy. They are my BRAND motherfucker.
I’m hurting to recount this because I am missing a folder of 20+ solid links, including discussion of these products on audioforums. But one of the terrifying things I came across was this review of the 201 Audio Analyzer. I take that back there are several terrifying things going on here:
- IEEE controlled interface, using a custom piece of hardware. RE901 Keyboard with 16 push buttons. This means I probably can’t just hook in some keyboard. I’ll need to find a way to send specific commands to the RE256. No idea if there is a command-line feature, but assume (! ) there is.
- “The Tape test program does a comprehensive evaluation including.. ” Tape based? Fuck. Odds of acquiring original software just plummeted. There must be hard copies of that stuff somewhere though maybe in a manual
- “The length of these programs give some idea of the time required to program the RE201 – the tape and tape recorder program consisting of 3229 lines of BASIC and the REPLOT program which simply allows plotting of functions occupies 2400 lines of BASIC”.. haha ha. yeah I’m completely fucked here. Even if I get this POS working, I’ll have nothing I can do with it.
Not Terrifying, but useful info gleaned:
- Monitor is not RGB ( not surprising ) but rather TTL
- RS232 interface for printing results
- Overall a pretty bad-ass piece of machinery
When you can’t do … buy! I think this is probably great advice for business acquisition or something. For me it means I can obsess about gear, instead of learning how to use it. Well I guess I’m buying this gear SO I can learn to use my other gear – but same basic shit. After another week or so of hunting I have acquired:
- Manuals for the RE901 keyboard, the RE201, and some other RE audio gear. Some of them are programmable, so I hope that their chapters on IEEE interface will contain something useful.
- Practically NIB IBM 5150 monitor. I probably should have just stuck with a smaller TTL security monitor or something, but this showed up on CL, and only had to drive an hour to get it. And I’m always hoping I can sell this shit at a later date. Plus, you know. It’s cool vintage computer shit. Oh it came with a keyboard – which are also in demand for gaming.
update: August: no update. Monitor is sitting in a box in the garage. Listed keyboard for a stupid price online, just to see if anyone bites. I guess I could probably just check real quick to see if I get a signal from the RE256 on the Monitor. But you know – lots of other stuff going on.
This happened like a year ago, but I’m trying to get through my long ass list of projects. Most of them are small and trivial, and I hesitate to even post them here. Wow, you cut a cord, flipped the polarity and now your power supply is negative-center! Huzzah! I mean I was pretty proud of that, but yeah – not really “post worthy”.
Oh, but this one is.
So I like to pretend I’m learning about audio electronics. I read some stuff, try and pick out the gist of it.. sort of like reading an abstract of a paper instead of the whole thing. About 2 years ago I decided I want to build speakers, or repair amps, or some stupid shit. Why? dunno. But it seemed like a cool hobby, with lots of smart people, and I desperately want to be smart.
So while I bungle my way around an oscilloscope, and trying to trace circuits ( and failing mostly ) – I see this beauty on ebay: an RE:256 Distortion Analyzer. Distortion / Spectrum Analyzers aren’t really important for basic audio electronics – but past a certain point they matter a whole lot. And the good ones remain expensive – vintage HP’s are in the $500+ range. So when I saw this RE256 at like $150… I was excited. Now, do I need a distortion analyzer? well no. But it seemed like it would be great to have. For example, I could test the distortion on an amp, make some changes, and see if I had improved it or not.
Researching the re256 was not easy. I mean – look at the search terms here:
I seriously don’t know how I got my first break, but I came across an audio forum talking about the RE204 Distortion Analyzer, and how it was super well made, and awesome. Hard to find, and replacement parts were non-existent. I don’t know why, but it was like the hooks were in. Because if there is one thing better than owning a useful piece of equipment – it is owning a super rare, hard to find version. Well, you might say the latter impacts the former, and you’d be right! But the heart only knows what it wants. And I wanted it.
In my mind – the 256 was just a “better” version of the 204. I don’t know why I thought that – but sadly, it is a common mistake i make. So of course I bid, and of course I won – and of course things went down hill from there.
So when it showed up, I was excited – and immediately disappointed. See, other analyzer like the hp 8903 have a digital display on it.
I thought I saw one on the RE256. I was wrong. I also quickly realized there aren’t even any buttons on this fucking thing. It is just a big black box with some jacks on it. Well, no worries – I can plug in a monitor, and sure it needs an older 5pin keyboard, but no worries. I have adapters. Note the unrealistic optimism here, and the beginning of the Sunk Cost fallacy. This is an ongoing theme in my life, along with the “cut twice, forget to measure” thing. So I get my plugs and my monitors, and hook it all up, and nothing happens. No signal, etc. Now I’m not too worried, because I didn’t buy this “as-is” this fucking thing is supposed to work. So I must be making a mistake here. So I started on a quest for a user manual.
I also relish a good “search”. Fun to obsess about you know?:It took a while, but this is what I found out:
- RE stands for “Radiometer Electronics” a dutch company. At some point it split in half with Audio on oneside, and medical tech on the other. The medical tech is still being made – the audio died out.
- Parts are beyond impossible to find. There are a few replacement boards floating around on ebay – each priced $600+
- Manuals are hard to find
- I was able to find out some stuff about the RE204, and 500 series gear… but not much on the 256.
And then I had a breakthrough – look at this beauty.
- Vintage monitor
- Vintage keyboard
- Programming manuals
So one of the many twists here is that the RE256 is designed as an automated tester – like I read about the RE204 (link) there is programming done in BASIC ( woo! ). But I’m hoping I can find the actual programs out there somewhere. I set this in the back of my head as I race to Goodwill.. surely they will have what I need. I come back with an old keyboard, some adapters, but no monitor.
As I try and read up on what kind of monitor I will actually need – I fall into a deep deep rabbit hole.
Next time: Scanlines.